Waterjet systems and the 5 benefits that it is able to offer
There are many benefits that you can get from a water jet cutting equipment and it is important that you know all about it before you start using one or even if you are already in the verge of using the waterjet technology. In order for you to make a good decision regarding the waterjet technology for your business, it would be wise to read this article so that you can learn more about the benefits that it is able to provide.
To begin with, there are two kinds of waterjet cutting methods that you should know of which is the abrasive and pure waterjet cutting. The pure waterjet cutting method is a process that used only water stream for cutting soft materials such as paper or foam, and other soft goods as well. So that the abrasive waterjet cutting method will work, a granular abrasive needs to be added in the water stream. When you need to cut ceramics, metal, or any hard materials, the method that you should use is the abrasive waterjet cutting because the granular abrasive will add power to the cutting stream.
If you want to increase your knowledge about the waterjet technology, here are five benefits that will help you with it:
1. You do not have to worry about the material limitations
There are a lot of materials that you can cut with the use of the water jet cutting systems such as plastics, composites, rubber, ceramics, rock or stone, and metals. A 200mm thickness is achievable as long as you are going to add a granular abrasive to your waterjet cutting machine to make it perform better.
2. HAZ or the heat affected zone is among some of the things that you don’t have to worry about
Due to its cold cutting method, there is no need for you to think about how you will affect the environment with the HAZ or the heat affected zone. There is no need for you to think about the risks of burns anymore since the cold cutting makes sure to enable clean cuts and keeps the safety of the operator significantly.
3. You don’t have to worry about any falsification or deformity of materials
It is possible to bypass any heat exposure because of the cold cutting method that is why there is no need for you to think that your material will be distorted especially if it is a hard one such as metal. A burr-free cut, as well as a smooth finish, will be the result from this.
4. You don’t have to do any additional finishing process
The products will be provided with the highest cutting quality with accurate results that is why you do not need to worry about any finishing process that you might need to apply.
5. No need to worry about any hazardous waste
It is a must for business establishments these days to make sure that their products are environmentally friendly since this process is becoming more apparent in the industry.